84
MAINTENANCE AND LUBRICATION
Drive Chain
Rear Drive Chain Slack
5. Roll the vehicle forward or
backward to adjust the chain slack
to the proper tension. See t he
illustration for proper splice link
clip opening position (1).
6. Tighten the eccentric locking bolts
to 61 N-m.
7. Tighten the caliper mounting bolt to 20 N-m.
8. Remove the pin punch.
9. Roll the vehicle forward, checking chain tension in several places
around the chain. The chain i s adjusted correctly when the tightest
portion of the chain has approximately 10 mm deflection.
10. Position the chain guide to allow 3 mm clearance and tighten the
retaining bolt to 7 N-m.
Fuel Filter
Replace the in-line fuel filter at the intervals
outlined in the Periodic Maintenance Chart
beginning on page 61. Do not attempt to
clean the fuel filter.
1
