Appendix Network Connection
© Polycom, Inc. 65 ViaVideo User’s Guide
Through a Virtual Private Network
If your network connection is through a Virtual Private Network
(VPN), use the configuration instructions on page 70.
Configure Your Connection
And you’re ready to communicate ViaVideo!
Simple Connection - Just a Modem, Thanks
If you are using a cable modem or DSL modem, you don’t need to
make any configuration adjustments. Because of the limited
bandwidth available, it is recommended that you select a lower line
speed, such as 128, for most calls. Select line speeds in the Dialing
Speeds screen (System Info>Setup>H.323>Dialing Speeds).
Router With NAT, No Firewall
To configure your ViaVideo to use your router’s Network Address
Translator (NAT):
1. Go to the Quality of Service and Firewall screen (System
Info>Setup>H.323>QOS).
ViaVideoUG.book Page 65 Thursday, December 7, 2000 2:49 PM
