Installing the Fax/Modem
2
6. Insert the supplied driver installation CD
in your computer, then select
Specify a
location
. The path is
F:\Win9X
(where F:
is the CD drive). Click
Next
.
7. Windows 98 searches for the USB 56K
Modem driver. The following screen
appears.
8. Verify the driver location, then click
Next
. Windows automatically copies the
driver onto your computer.
9. After copying the modem driver, the
following screen appears.
10. Click
Finish
. Windows automatically
locates and copies the remaining files.
11. After installation, verify that
USB 56K
Modem
appears under the
Device
Manager
tab by clicking
Start/Settings/
Control Panel/System/Device Manager
.
12. Click
OK
. The orange
PW
indicator on
the fax/modem lights, indicating that the
fax/modem is now ready to use. You
can use an existing fax/modem
program or use the supplied
SuperVoice software to send fax, e-
mail, or surf the Internet. (See “Installing
SuperVoice” on Page 7.)
9+0&195"4222
1. Turn on your computer.
2. Flip up the phone line jack cover on the
fax/modem and with the locking tab
facing up, insert one end of the supplied
RJ-11 cable plug into the phone line
jack until it clicks. Then connect the
other end to the telephone line wall
jack.
3. Connect the fax/modem’s USB plug to
your computer’s USB port, using the
supplied USB extension cable if
necessary.
±
4. Windows 2000 recognizes the device
and the
Found New Hardware Wizard
screen appears.
5. Click
Next
. The following screen
appears.
±"016'"±"
If you need a longer USB cable, connect the
supplied USB extension cable’s USB jack to
the fax/modem’s USB plug by matching the
USB icons on the fax/modem’s USB plug and
the extension cable. Then connect the
extension cable’s USB plug to the computer’s
USB port.
Installing the Fax/Modem
