Installing the Fax/Modem
3
6. Select
Search for a suitable driver for my
device (recommended)
, then click
Next
.
The following screen appears.
7. Insert the supplied driver installation CD
in the CD-ROM drive and select
Specify
a location
.
8. Click
Next
. The following screen
appears.
9. Click
Browse
to select the file location.
The path is
F:\WIN2000
(where F: is the
CD drive).
10. Windows 2000 locates the driver and
the following screen appears.
11. Click
Next
to continue. The
Digital
Signature Not Found
screen appears.
12. Click
Yes
to continue the installation.
Windows 2000 automatically copies the
driver and related files into the
computer. The device installation is
complete after copying the driver files.
13. Click
Finish
. The orange PW indicator
lights and the following screen appears.
14. Click
Finish
. The fax/modem is ready to
use. You can use an existing fax/
modem program or the supplied
SuperVoice software to send fax, email,
or surf the Internet. (See “Installing
SuperVoice” on Page 7).
9+0&195"/'
1. Turn on your computer.
2. Flip up the phone line jack cover on the
fax/modem and with locking tab facing
up, insert one end of the supplied RJ-11
cable plug into the phone line jack until
it clicks. Then connect the other end to
the telephone line wall jack.
3. Connect the fax/modem’s USB plug to
your computer’s USB port using the
supplied USB extension cable if
necessary. Windows ME recognizes the
device and
Add New Hardware Wizard
screen appears.
4. Select
Specify the location of the driver
(Advanced)
, then click
Next
. The
following screen appears.
5. Insert the supplied driver installation CD
in the CD-ROM drive and select
Search
for the best driver for your device
