If these settings have been made before, the messages on the display will not
always match those shown here. The setting already entered will appear along
with the word [
]. In this case, press Yes to change the setting.
1
Press Function and 6, enter the
access code 2222, then enter 61.
You’ll get this:
2
Press Yes.
3
Press Yes again.
4
Enter your phone number.
❐ The format of the number is normally as follows:
International Dial Prefix, Your Country Code, Your Area Code, then you
must add a Pause, followed by your telephone number.
Check the International Dialing Prefix and the Country Code with your lo-
cal telecommunications operator. The example shown is for the USA; the
codes to add are 011 and 1.
5
Press Yes. will
flash on the display and you’ll get
6
Press Yes.
7
Enter your office, company, or per-
sonal name, or any other appro-
priate identification. (Use the
quick Dial keys. See page 71 for
details.)
8
Press Yes. will
flash on the display and you’ll get:
INSTALLATION Initial Settings & Adjustments
88
