LOCATION
For the best possible performance, install your machine in a place which satisfies
the following conditions.
❐ Not exposed to direct sunlight
❐ Well ventilated (air turnover at least three times per hour)
❐ Level
❐ Not subject to vibration
❐ Away from other electronic equipment, to
avoid interference
❐ Away from areas containing corrosive
gas
❐ Dust-free
❐ Condensation-free
❐ Temperature 63 to 82 °F
❐ Humidity 40 to 70% RH (do not install
near a humidifier)
❐ Away from heaters and air conditioners,
to avoid sudden changes of temperature
❐ Within 5 yards of a three-pin grounded
power outlet (115 Volts, 60 Hz)
❐ With the clearance as shown on the right
IMPORTANT POINTS ABOUT POWER CONNECTION
❐ The supply from the wall outlet must not fluctuate by more than 20V either side
of 115 Vac.
❐ The power cord should not be laid in a place where it might trip somebody.
❐ Do not lay anything on the power cord.
❐ If you have to use an extension cord, make sure that it is capable of carrying
125V/15A, and that your facsimile terminal is the only piece of equipment con -
nected to that cord.
NOTE: This machine generates a certain amount of ozone. Although the
amount generated is within safety requirements, it is recommended
that, to avoid ozone buildup, you install the machine in a room which
can be air-conditioned or well ventilated.
4"
4"
4"
GENERAL PRECAUTIONS
13
