Checking Which Numbers are Already in the Group
First, enter Group Programming mode as explained on page 83. Then:
1. Press 2 .
2. Press ↓ to scroll through the numbers on the display.
❐ To erase the displayed number:
Clear . Go to step 3.
❐ When you have finished checking
this group: No . Go to step 3.
3. Now, you can use another module (press a key from 1 to 5), or start working
on another Group (press Yes then go to step 2 of the procedure on page
83).
You may also return to standby mode by pressing Function .
Storing a Label for this Group
First, enter Group Programming mode as explained on page 83. Then:
1. Press 3 .
2. Input a label for the group using the Quick Dial keys.
Example: DISTRIBUTORS.
3. Press Yes .
4. Now, you can use another module (press a key from 1 to 5), or start working
on another Group (press Yes then go to step 2 of the procedure on page
83).
You may also return to standby mode by pressing Function .
GROUP DIAL
NO
TO CANCEL
G 01 08 DEST. 1/25 CLR:
CLR
2125551234
GROUP DIAL ENTER LABEL
G 01 08
ABC
GROUP DIAL
YES
OR
CLR
.
NO
G 01 08
DISTRIBUTORS ABC
_
Inputting and editing labels:
see page 2.
GROUP DIAL SELECT
G 01 08 DEST. 0
YES
TO END
1. ADDRESS 2. CHECK 3. LABEL
_
GROUP DIAL SELECT
G 01 08 DEST. 0
YES
TO END
1. ADDRESS 2. CHECK 3. LABEL
_
SECTION 4. PROGRAMMING THE MACHINE
85
