18
Specifications
Maximum Output Level
(0.5% T.H.D at 1KHz
-128dBu equivalent input noise ( Rs=150 )
-95dBu Residual noise (MAIN L/R,MONO,MAIN 2,GROUP,AUX,EFX OUT)
-83dBu
MAIN,MONO,GROUP * Master fader at naminal level and all channel fader
Minimum.
-76dBu AUX Master control at nominal level and all channel control Minimum.
Gain Control(mono Input
Channel)
Power Source/Power
Consumption
Where 0dBu=0.775V and 0dBV=1V
+24dB(MAIN L/R) @10K +20dB(MAIN 2,GROUP,AUX/EFX) @10K
+20dB(INSERT) @10K More than 100mW(HEADPHONES) @33
AC 120V/230V/240V,50/60Hz L1200:40W,L2000:60W
+5V DC 0.5A max USB A-TYPE FEMALE
L1200:16.74Ib.(7.6Kg) , L2000:22.25Ib.(10.1Kg)
L1200:18.9''(W)*15.9''(D)*4.9''(H) , 480mm(W)*403mm(D)*125mm(H)
L2000:27.4''(W)*15.9''(D)*4.9''(H) , 696mm(W)*403mm(D)*125mm(H)
24 BIT DSP,100 selectable presets
Peak:An indicator for each channel turns on when the pre-channel fader signal is 5dB below clipping.
Input Channel Equalization
MONO
MID:100 ~ 8KHz shelving ± 15dB
Input Channel Equalization
STEREO
HIGH:12KHz shelving ± 15dB
HI-MID:3KHz peaking ± 12dB
LO-MID:500Hz peaking ± 12dB
9 bands(63,125,250,500,1K,2K,4K,8K,16K) ±12dB maximum
40dB Variable (-20dB ~ +20dB), (-50dB ~ -10dB)
HIGH:12KHz shelving ± 15dB
Hum and Noise Input
GAIN=Maximum Input
sensitity -50dBu
-70dB between input/output channels (CH INPUT)
44dB Variable (-50dB ~ -6dB),(-30dB ~ +14dB)
76dB MIC IN TO AUX (POST) / EFX SEND
-70dB between input channels
56dB LINE IN TO AUX(POST) / EFX SEND
20dB ST IN TO MAIN L/R,MONO
<0.1% @+14dB 20Hz~20KHz (MAIN L/R,GROUP,AUX/EFX SEND) @10K
20Hz~20KHz,+1/-1dB(MIX L/R,GROUP,AUX/EFX SEND) @10K
74dB MIC IN TO MAIN L/R,GROUP,MONO
54dB LINE IN TO Main L/R,GROUP,MONO
Specifications are subject to change without notice.
