24
From DOME CAMERA SETUP
MOTION LOCK
If ON, the user is prevented from configuring or deleting
PRESET, SWING, PATTERN, or GROUP settings.
However, those settings can still be used during
operations. If OFF, the user is allowed to configure or
delete those settings using the OSD menu.
PWR UP ACTION
When ON, if power is unexpectedly cut to the camera
and restored, the camera continues to operate the last
action that was being performed before power was cut.
This includes most PRESET, SWING, PATTERN, or
AUTO FLIP
If ON, the image is automatically vertically flipped when
the camera tilts below its center.
JOG MAX SPEED
This sets the maximum jog speed, which is the pan and
tilt speed of the camera when operated by the user. The
jog speed is also automatically adjusted according to the
camera's zoom. As the zoom level increases, the pan
and tilt jog speed decrease.
JOG DIRECTION
This determines whether the controls will be inverse or
normal when operating the pan and tilt of the camera.
FRZ IN PRESET
If the Freeze in Preset function is turned ON, the on-
screen camera image at the beginning of a PRESET
action is frozen while the camera moves from the
starting position to the ending position, as programmed
by the user. If turned OFF, the on-screen camera image
moves as the camera moves from the starting to ending
<PARKING ACTION SETUP>
Determines what the camera will do if it receives no PTZ
command during a preset time. See page 25.
<ALARM INPUT SETUP> This is a reserved function, and is currently not available
MOTION LOCK OFF
MOTION SETUP
EXIT
Configures the general functions of the pan and tilt motions.
