28
From DOME CAMERA SETUP
SWING NO.
Selects which SWING motion to edit. Choose 1
through 8. If a selected SWING motion has not
been defined, "NOT USED" is displayed in the first
and second positions for that motion
[PRESET 1 ~ 94 or 96 ~ 128]
2ND POS.
[PRESET 1 ~ 94 or 96 ~ 128]
Select the two PRESET positions between which
the SWING motion will operate. NOTE -- If a
selected PRESET was not previously defined via
the OSD programming, "UNDEFINED"
will be displayed.
SWING SPEED
Programs the speed at which the camera moves,
between the two PRESET positions.
CLEAR SWING
Choose “OK” to delete the data in the selected
SWING.
SWING SETUP
EXIT
This menu configures up to eight different swing motions back and forth
between two different PRESET positions.
When the SWING function operates, the camera moves (pans and tilts) to
the PRESET position that was set as the "1ST POS." and then moves
clockwise to the PRESET position set as "2ND POS." At that point, the
camera moves counterclockwise back to the "1ST POS." It then repeats
that motion back and forth between the two PRESET positions until another
command is inputted.
