30
From DOME CAMERA SETUP
Configures up to eight groups of motions, with each group
consisting of any combination of up to 20 actions, including
PRESETS, SWINGS, PATTERNS, and temporary halts in
GROUP NO
Selects which GROUP number to edit. If
the selected GROUP number has not yet
been programmed, "UNDEFINED" will be
displayed under the selected GROUP
CLR GROUP
Choose "OK" to delete the data in the
<EDIT GROUP>
Goes to the "EDIT GROUP" menu. See
below
NO ACTION ### DWELL OPT
CANCEL
[NEAR:EDIT]
EDIT GROUP 1
EDIT GROUP 1
CANCEL
[FAR : EDIT :END]
1. Press the NEAR key on the "NO" line to start the
GROUP setup.
2. Use the joystick or arrow keys to move up and down to
select the number of the ACTION to configure. There are
a maximum of 20 ACTIONS which can be done in
each GROUP.
3. Set the ACTION, DWELL time, and OPT (option) for each
action. The item ready for configuring is displayed in
reverse text. Move the joystick/arrow cursor right and left to
select items to configure, and then move the joystick/arrow
cursor up and down to change the value of the ACTION.
[NONE / PRESET / SWING / PATTERN]
DWELL
NOTE — DWELL configures how long the
camera waits between each ACTION.
OPT
Option. If PRESET is selected as the
ACTION, this will be the PRESET speed.
If PATTERN or SWING is selected as the
ACTION, set OPT for the number of times
the PATTERN or SWING is repeated.
