Administration Methods
TPG60 User Manual 20
You can select various filters in the left-hand section of the main
dialog. Filters determine which devices are shown in the print server
list. The filters can be configured via Filter.
Logging
Logging means that actions carried out by the user or the
InterCon-NetTool will be registered automatically and saved in a log
file. The contents of the log file can be displayed in a log window.
The log file can either be shown or hidden. If logging is disabled, the
log window will not be displayed. The log window is not available if
logging is disabled. In this case the menu item Show Log File
appears dimmed.
Proceed as follows:
1. Start the InterCon-NetTool.
2. Select Extras – Show Log File from the menu bar.
ª The log window is either shown or hidden.
Even if the log window is hidden, the registration of log information
in a log file continues.
You can change the logging settings.
Proceed as follows:
1. Select Extras – Settings from the menu bar.
The Settings dialog appears.
2. Select the category Logging Options.
3. Configure the desired settings.
4. Click OK to confirm.
ª The settings are saved.
If the log file is larger than the preset value, the log file is reduced to
half the records. The oldest records will be deleted in this process
(first-in, first-out method).
