TURNING LIGHTS ON AND
OFF REMOTELY
HT544/KF574
Remote Control
Press [LIGHT ON] or [LIGHT
OFF]
on the Remote Control to turn on or
off lights connected to X-10 Modules
which you set to the same Housecode
AND Unit Code as the Console.
Note: This button is not an ALL lights
on button. It only turns on modules set
to the same
Housecode
AND Unit
Code as the Console.
RT504
Remote Control
The RT504 provides independent con-
trol of up to 16 modules which you set
to different Unit Codes. It transmits
signals to the supervised security sys-
tem’s Console which then re-transmits
the signals to other modules over your
house wiring. You can even dim and
brighten lights connected to Lamp
Modules and Wall Switch Modules.
The
RT504
does not require any “in-
stallation.” Just fit four AAA
alkaline
batteries
in
its battery compartment
and set its Housecode dial to match
the Console
- it's ready to use.
6
4
6
6
6
RT504
Note:
If you already own the
RC5000
wireless
transmitter and transceiver
(RT504
+
RR501).
set the RR501 and
the
PS561
to the same
Housecode.
SH624 Remote Control
The SH624 Remote Control combines
the features of the
HT544
and the
RT504.
It allows you to Arm and dis-
arm the system in HOME and AWAY
modes (see page 17 for
details).
It has
SECURITY LIGHT ON and OFF but-
tons which work like the [LIGHT
ON]
and [LIGHT
OFF]
buttons on the
HT544
and
KF574.
It
also
lets you
control up to four
additional
X-10
Modules and dim and brighten lights
tool
controls
mod-
ules set to same
House Code
and Unit Code
as console
SH624
Controls mod-
ules set to same
House Code as
Console and
unit codes 14
Dims and
brightens
lights
Press to turn
modules
ON
and OFF.
Then press to dim
or brighten light.
Select to control modules set
to Unit Codes l-8 or 9-16.
Smarthome.com, Inc. (800) SMART-HOME (949) 221-9200 http://smarthome.com
