CONFIDENCE DISPLAY
The Stingray includes a built-in
Bargraph display. Activate the display
by pressing the button on the
instrument face. It will scroll between
level, velocity, temperature, remaining
battery power and remaining logger
capacity. To conserve battery power,
the display will shut Off after 1 minute.
Double press the button to freeze the
display on one parameter (Parameter
flashes).
CALIBRATION
Stingray does not require field calibration.
It is factory-calibrated to measure level from the bottom of the pipe or channel to the water surface
(maximum 15 ft / 4.5 m), and velocity from 0 to 10 ft/sec (0 to 3.05 m/sec).
Stingray Level-Velocity Logger
Manual Series A.3
Page 6
Stingray
Level-VelocityLogger
LEVEL
0
0
ft
2
4
