31
10.7. Triplex Settings
Live images can be assigned to any segment of the screen while recorded images are played back on the
multi-segment split screen. For details, please read the instruction manual enclosed with the Digital Video
Recorder.
1 Hold down the MULTI key for 2 seconds or more while recorded
images are played back on the multi-segment split screen.
The Triplex setting screen is displayed.
Operate the Remote Controller as follows while the Triplex setting
screen is being displayed:
• To move the cursor, tilt the joystick up, down, left or right.
• To view live images, enter the camera number for live display using
the ten-key numerical pad, then press the FULL key.
• To return to recorded image playback, select the live image, then
press the SEQUENCE key.
2. Rotate the joystick counterclockwise or press the C key to exit the
Triplex setting screen.
Note
Reset all live images to recorded images on the Triplex setting screen
in order to switch Triplex mode to playback mode.
