43
12.4.4. Abbreviation (Function programming)
The functions of the Combination Camera and Digital Video Recorder can be programmed into an
abbreviation number (1
-
508 and F1
-
F4 keys).
Note
The Combination Camera's protocol must be selected before performing abbreviation number settings. If the
protocol is selected, this permits the available functions to be selected for the camera.
1. Select [ABBREVIATION] while the menu is
displayed and press the SET key.
2. Select [1. SET] and press the SET key.
3. Enter an abbreviation number and press the SET
key.
Use numbers 1
-
508. The F1
-
F4 keys can be
selected with the joystick. Pressing the SET key
moves the flashing cursor to the second line.
4. Select the function to be programmed and press
the SET key.
Functions that can be set are as shown in the
table below.
5. To continue to set abbreviation numbers, repeat
Steps 3 and 4. To return to the setting item
display, press the C key.
Abbreviation Nos.
