A SERVICE OF

logo

Open as PDF
next previous
TL-MR3020 Portable 3G/4G Wireless N Router
The WPS Configuration Screen of Wireless Adapter
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my AP
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure
6-2, then the following screen will appear.
Step 2: Choose “Enter the new device's PIN” and enter the PIN code (take 16952898 for
example) of the wireless adapter in the field as shown in the figure above. Then click
Connect.
)
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen as shown in
the following figure.
Step 3: For the configuration of the wireless adapter, please choose “Enter a PIN into my
access point or a registrar” in the configuration utility of the WPS as below, and click
Next.
-195-