TL-MR3020 Portable 3G/4G Wireless N Router
)
Note:
If the above configuration takes effect, to configure to the Router by typing
http://192.168.0.254:88
(the Router’s LAN IP address: Web Management Port) in the address
field of the Web browser.
3) Log in to the Router, click the “Forwarding” menu on the left of your browser, and click
the "Virtual Servers" submenu. On the "Virtual Servers" page, click Add New…,
then on the “Add or Modify a Virtual Server” page, enter “80” into the blank next to
the “Service Port”, and your IP address next to the “IP Address”, assuming
192.168.0.188 for an example, remember to Enable and Save.
Figure A-9 Virtual Servers
Figure A-10 Add or Modify a Virtual server Entry
5. The wireless stations cannot connect to the Router.
1) Make sure the "Wireless Router Radio" is enabled.
2) Make sure that the wireless stations' SSID accord with the Router's SSID.
3) Make sure the wireless stations have right KEY for encryption when the Router is
encrypted.
-237-
