TL-R488T Load Balance Broadband Router User Guide
50
4-30).
Step 2: Click Add New…/Modify shown in Figure 4-34, you will see a new screen shown in
Figure 4-35.
Step 3: Enter the “Effective
time” that the rule will take effect, enter the “Domain Name” as
shown in Figure 4-35.
Step 4: Select the “S
tatus” for the rule as shown below.
Figure 4-35
Step 5: Finally, click Save to make the rule take effect.
Step 6: Go to Step 2 to complete the other rules continually.
After you finish the configurations, you will see the rules in the table below:
Figure 4-36
)
Note:
Before adding an IP Address Filtering entry, you should enable the Firewall and the IP Address
Filtering function first (shown in Figure 4-30).
Other configurations for the entries
as shown in Figure 4-34:
Click the Delete button to delete the entry.
Click the Enable All button to enable all the entries.
Click the Disable All button to disable all the entries.
Click the Delete All button to delete all the entries.
Click the Previous button to view the information in the previous screen, click the Next button to
view the information in the next screen.
4.6.4 MAC Filtering
Choose menu “Security→MAC Filtering”, you can configure the MAC Address filtering rule in
the next screen (shown in Figure 4-37). The MAC Address Filtering feature allows you to
control
