show ipv6 mld snooping static-mcast
Description
The show ipv6 mld snooping static-mcast command is used to display the
static multicast groups configured by users.
Syntax
show ipv6 mld snooping static-mcast
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display static multicast groups:
TL-SG2424(config)# show ipv6 mld snooping static-mcast
show ipv6 mld snooping group
Description
The show ipv6 mld snooping group command is used to display multicast
groups.
Syntax
show ipv6 mld snooping group [ dynamic | static ][ vlan vlan-id ]
Parameter
dynamic —— Display dynamic groups.
static —— Display static groups.
vlan-id ——The VLAN ID selected to display, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display all of the multicast groups:
TL-SG2424(config)# show ipv6 mld snooping group
show ipv6 mld snooping filter
Description
The show ipv6 mld snooping filter command is used to display the filter
entries.
183
