TL-WA730RE 150Mbps Wireless N Range Extender User Guide
B. When you choose Access Point mode, the Wireless Setting page will be shown in Figure
3-7.
Figure 3-7 Wireless Settings - Access Point mode
1) Create an easy-to-remember name for your wireless network, write it into Wireless
Network Name(SSID).
2) Select Most Secure (WPA/WPA2-PSK) encryption mode and enter a password below to
prevent unauthorized access to your AP.
3) Click Next, you will then come to Network Setting page for furthers configuration.
5. When you have configured Wireless Settings in step 4, The Network Setting page will
appear then, shown in Figure 3-8. It is recommended that you keep the default settings on this
page.
Figure 3-8 Network Settings
)
Note:
1. These settings are only for basic wireless parameters, for advanced settings, please refer
to Section 4.7 Wireless.
2. To change to another mode, please refer to T3 in Troubleshooting to assign a static IP
address 192.168.0.100 for your computer first before logging in the management page.
6. Click the Next button. You will then see the Finish page. Here takes the settings for Access
Point mode for example.
12
