TP-Link TL-WR940N Manual

A SERVICE OF

next previous

TL-WR940N/TL-WR941ND

450Mbps Wireless N Router

Figure 4-18

 Disable Security - If you do not want to use wireless security, select this check box, but it’s

strongly recommended to choose one of the following modes to enable security.

 WPA/WPA2-Personal(Recommended) - It’s the WPA/WPA2 authentication type based on

pre-shared passphrase.

• Version - you can choose the version of the WPA-PSK security on the drop-down list. The

default setting is Automatic, which can select

WPA-PSK (Pre-shared key of WPA) or

WPA2-PSK (Pre-shared key of WPA) automatically based on the wireless station's

capability and request.

• Encryption - When WPA-PSK or WPA is set as the Authentication Type, you can select

either Automatic, or TKIP or AES as Encryption.



Note:

If you check the WPA/WPA2-Personal(Recommended) radio button and choose TKIP

encryption, you will find a notice in red as shown in Figure 4-19.

34