![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/9/69/969a2802-ebba-41f7-ae74-b9d63fb49b24/969a2802-ebba-41f7-ae74-b9d63fb49b24-bgb.png)
............ www.truemfg.com ............
True Food Service Equipment, Inc.
9
9
REQUIRED TOOLS:
• Phillips Screwdriver
• Stiff Bristle Brush
• Adjustable Wrench
• Vacuum Cleaner
Step 1
Disconnect power to unit.
Step 2
Remove the front grill by backing out four corner thumb
screws. (See image 3).
Step 3
Remove bolts anchoring compressor assembly to frame
rails and carefully slide out. (tube connections are
flexible)
Step 4
Clean off accumulated dirt from the condenser coil and
the fan with a stiff bristle brush. (See image 1).
Step 5
Lift cardboard cover above fan at plastic plugs and
carefully clean condenser coil and fan blades.
Step 6
After brushing condenser coil vacuum dirt from coil, and
interior floor. (See image 2)
Step 7
Replace cardboard cover. Carefully slide compressor
assembly back into position and replace bolts.
Step 8
Reinstall front grill assembly onto unit. Tighten all
screws.
Step 9
Connect unit to power and check to see if compressor is
running.
MAINTENANCE, CARE & CLEANING
MAINTENANCE, CARE & CLEANING
CLEANING THE CONDENSER COIL
When using electrical appliances, basic safety precautions should be followed, including the following:
F°
35°
Image 1.
Image 3.
Image 2.