A SERVICE OF

logo

Open as PDF
next previous
Search
You can use the SEARCH feature to find active frequencies in your area. Many frequencies have already have been
pre-programmed into one of the SCAN MODES (Highway, Police, DOT, etc.).
You can search for any frequencies between 29.000 and 956.000 MHz, as well as CB channels 1 through 40, as long as
they are within the 12 Bands covered by the BCT7. See the table on page 5, or the Specifications at the back of this
Guide.
1. Press
B
to enter
Band Search Mode.
➪
2. Two seconds later, the BCT7
begins searching that band.
➪
Press
<
or
>
to change the
direction (up or down) of the
frequency search.
OR
Press
B
repeatedly to select
another band.
During Search, press
L
to
lockout undesired frequencies that
the scanner stops on.
Note:
AIR appears when
searching the Aircraft Band.
18