Programming Frequencies
1. Press
B
to find a frequency
band you wish to search.
➪
2. When the BCT7 begins
searching, press
H
.
➪
3. Press
<
or
>
to find the
desired frequency.
4. Press Q .
➪
5. Select the bank where you
want to program the frequency
(Highway, Police, DOT, News, Fire
or Private).
The unprogrammed channel
number and 000.0000 flash on and
off over the frequency you chose.
➪
6. Press
<
or
>
keys to
move to the channel where
you wish to program the
frequency (you may skip this
step if you wish to simply
place the frequency in the
next available channel).
7.Press Q again to enter the
frequency.
➪
8. Press
H
to begin
scanning
OR
9. Press the
B
key to begin
selecting another frequency
to program.
If you find a frequency you would like to program while in a general search of a band, press
H
to stop the search on the
frequency, then follow programming steps 3 through 8.
22
