Rack Mounting Instructions
The D-5.5 and D-5.5E are designed for either console or rack-mount use, using a pair of
brackets (included). The following procedure should be observed for the rack-mount use.
1. Remove both side panels
and armrest
unscrewing
and removing 6 screws.
2. Mount the brackets on both
sides of the chassis, using the
screws removed from the
side panels.
3. The rear panel
and blank
panel
should be inter-
changed to allow for easy
connection when the D-5.5
and D-5.5E are rack
mounted.
a. Remove the rear panel corner frame and blank panel
b. Put the rear panel in the original position of the blank panel.
c. Put the corner frame back in place.
d. Put the blank panel in the original position of the rear panel.
WARNING
The D-5.5 and D-5.5E contain voltage levels that may be hazardous to human life. Always
disconnect the power cord from wall outlet prior to removing either unit's outer case.
— 18 —
