![](https://pdfstore-manualsonline.prod.a.ki/pdfasset/e/45/e455ea92-f242-4604-85b1-118ca74d0b1f/e455ea92-f242-4604-85b1-118ca74d0b1f-bg4.png)
4
INSTALLATION
MAIN PIPING CONNECTIONS
NOTE
3
1.
2.
3. This valve may be installed upright, + or – 90˚
1
4. -
you are using old pipe, be sure it is clean and
5.
tape that is approved for all gases, only to the
male threads of the pipe joints. DO NOT apply
3
6.
50
7. See SYSTEM WIRING
-
SHUT
OFF GAS AND FIX ALL LEAKS IMMEDIATELY.
LP GAS CONVERSION
-
PILOT GAS CONNECTION
2
1/4"
-
additional 1-1/2
7-
Allpipingmustcomplywithlocalcodes,ordinances,
and/or national fuel gas codes.
Piped Gas
Supply
Piped Gas
Supply
Tubing Gas
Supply
NOTE: ALWAYS INCLUDE A
DRIP LEG IN PIPING
Figure 2. Typical gas valve piping
NOTE: A MANUAL SHUTOFF VALVE
MUST BE INSTALLED WITHIN
6 FEET OF THE EQUIPMENT
Horizontal
Drop
Gas Valve
3 in.
minimum
Gas Valve
Riser
3 in.
minimum
Drop
Horizontal
Riser
Gas Valve
3 in.
minimum
Figure 3. Typical Gas Valve Piping
NOTE
INSTALLATION