Selecting Transport Protocols
151
Selecting Transport Protocols
When using the NetWare, SMB, or SNMP port, change the transport protocol if
required.
• NetWare: IPX/SPX, TCP/IP
• SMB: NetBEUI, TCP/IP
• SNMP: UDP, IPX
1.
On the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select [Port Status].
3.
Select the required transport protocol.
NetWare: IPX/SPX, TCP/IP
SMB: NetBEUI, TCP/IP
SNMP: UDP, IPX
4.
Select [Apply].
Screen Layout
The CentreWare Internet Services home
page contains four panels without visible
boundaries. You can change the left and right
panel sizes by dragging the boundary
between them.
Header Panel
Displays the header for all pages. The header
includes the CentreWare Internet Services
logo and the model of the machine. Just under
this panel on most pages is the tab bar which
corresponds to the five functions or page buttons. These are [Status], [Jobs], [Print],
[Scan], [Properties], and [Support]. You can navigate through the pages when you click
the text on each tab.
Logo Panel
Displays the company logo.
Menu Panel
Displays a navigation tree, listing the items available within each category, with the
currently displayed item highlighted.
Header Panel
Main Panel
Menu
Panel
Logo
Panel
