Appendix Section
Xerox 4500 PS TR
165
LOCAL_SAP
Description: Service Access Point of the device
Range: 0x04 - 0xEC modulus 4
Default: 0x04
BEGIN_CONFIGURATION PPDX
PORT_PORT
Description: The TCP/IP port number
Range: 5001, 5002, 5005, 5006
Default: N/A
RESPONSE
Description: Sets the Response timeout. The response timeout is
used when a KEEPALIVE message is sent. If the
message is not deleted from the socket (sent and
TCP acknowledged), before response timeout, the
session is assumed interrupted.
Range: 0-9999
Default: 20
KEEPALIVE
Description: Sets the KEEPALIVE timeout. For every
KEEPALIVE period, an empty data buffer is sent to
the remote node to check whether the connection is
still active.
Range: 0 (disabled)
1-9999
Default: 60
BEGIN_CONFIGURATION LPDX
LPD_QUEUE
Description: The LPD queue name. This parameter is used for
matching the “instream” queue name.
For details, see the Begin_Configuration PAR2IN x
keyword.
Range: ASCII string
Default:
LPD_AUTOCR
Description: Specifies the LPD to convert all CR to a CR and LF.
Range: NO (0)
YES (1)
Default: N/A
