28
Ⅵ Changing selections
Refer to the display panel or the monitor screen when changing the selections.
When using the remote controller, set the PARAMETER
/SET MENU switch to the SET MENU position.
Note: The cover of the remote controller must be open.
1 Turn on the power of this unit. (If necessary, turn on the
power of the monitor to display information.)
2 Select the function “1. SPEAKER SET” by pressing one
of the following buttons once or more. (The title will
appear on the display).
3
4 Press “+” or “–” once or more to position the arrow-
shaped cursor at the desired selection.
5 Follow the same procedure for “1B. REAR SP”, “1C.
MAIN SP”, “1D. LFE/BASS OUT”, “1E. SYS. SETUP”
and/or “1F. MAIN LEVEL”.
First select the function by following step 2, and then
select the proper position by following step 4.
Front panel
Press once.
Remote control
Remote control
