EXAMPLES OF BASIC CONNECTIONS
Never plug in this unit and other components until all connections are completed.
Note
When making connections between this unit and other components, be sure all connections are made correctly, that is to say L (left)
to L, R (right) to R, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual for each component to be connected to this unit.
* If you have YAMAHA components numbered as
1, 2, 3, etc. on the rear panel, connections can be made easily by making sure
to connect the output (or input) terminals of each component to the same-numbered terminals of this unit.
1
When this unit is used as a main controller
(Europe model)
To AC outlet
Monitor TV
Amplifier
(for driving main speakers)
Video cassette recorderTV/Satellite tuner
Tape deck,
MD recorder, etc.
CD player
LD player etc.
Main speakers
Left
Right
Tuner
Notes
●
If you select this connecting way, the PROCESSOR
SELECTOR switch on the front panel of this unit must be
set to the “INTERNAL” position.
●
For speaker connections, see page 12 – 13.
See page 11.
