15
English
1 POWER switch
Press this switch to switch the power on. Press it again to
switch the power off.
2 Remote control sensor
Receives signals from the remote control transmitter.
3 Display panel
Shows various information. (Refer to page 17 for details.)
4 Input selector buttons
Select a program source to listen to or watch. When a button is
pressed, the name of selected source appears on the display.
5 2CH/6CH selector button
When the TV/DBS or DVD/LD input source is selected,
pressing this button switches the input signals between 2
channel stereo signals and 6 channel discrete signals. When
switched to “6CH”, signals from the Dolby Digital (AC-3)
Decoder etc. connected to the 6CH DISCRETE INPUT
terminals of this unit are selected as the input signals.
6 VOLUME control
Used to raise or lower the volume level.
7 EFFECT button
Switches on/off the digital sound field processor (including the
Dolby Pro Logic Surround decoder).
8 DSP program selector buttons
Select a DSP program. When a button is pressed, the name of
selected program lights up on the display.
9 CENTER MODE button
Selects a center channel output mode (NORMAL, WIDE or
PHANTOM). (For details, refer to page 18.)
0 DELAY/CENTER/REAR/SWFR and TIME/LEVEL +/–
buttons
Adjust the delay time (DELAY), the center channel output level
(CENTER), the rear channel output level (REAR) and the
output level to the SUBWOOFER OUTPUT terminal (SWFR).
Select the item which you want to adjust by pressing the
DELAY/CENTER/REAR/SWFR button and adjust its time or
level by pressing the TIME/LEVEL +/– button.
A PROCESSOR SELECTOR switch
When you play a source on an audio/video unit connected to
this unit, set this switch to the “INTERNAL” position. When you
listen to sound reproducing signals input to the INPUT (from
AMP/RECEIVER PREOUT) terminals on the rear panel from
the external amplifier etc., set this switch to the “EXTERNAL”
position.
CONTROLS AND THEIR FUNCTIONS
FRONT PANEL
