53
English
3 Select a program that is suitable for the source.
The name of the selected program lights up on the display panel and the monitor screen.
4
●
A
djust the output level of each speaker. (For details, refer to the corresponding descriptions on pages 55 and 56.)
●
You can create your own sound field taste. (For details, refer to pages 66 to 70.)
Notes
●
Program selection can be made to individual input sources. Once you select a program, it is linked with the input source selected
at this time. So, when you select the same input source the next time, the same program will be automatically recalled.
●
If you prefer to cancel the DSP, press the EFFECT button. The sound will be the normal 2-channel stereo without surround
sound effect.
●
When a monaural sound source is played with the program PRO LOGIC (Normal/Enhanced), a proper effect will not be
obtained. Moreover, sound may become unnatural depending on the settings of the speaker output modes (1A to 1D) in the SET
MENU mode.
●
When this unit’s Dolby Pro Logic Surround decoder, Dolby Digital decoder or DTS decoder is used, if the main-source sound is
considerably altered by overadjustment of the BASS or TREBLE control, the relationship between the center and rear channels
may produce an unnatural effect.
●
When a source of signals input to the EXTERNAL DECODER INPUT terminals of this unit is selected, the DSP cannot be used
and the EFFECT button also will not function.
