Quick start guide
9 En
INTRODUCTION
English
1 Turn on the video monitor connected to this
unit.
2 Press
A
MASTER ON/OFF inward to the ON
position on the front panel.
3 Rotate the
C
INPUT selector to set the input
source to “DVD”.
4 Start playback of the desired DVD on your
player.
5 Rotate
Q
VOLUME to adjust the volume.
6 To set this unit to the standby mode, press B
MAIN ZONE ON/OFF.
y
For details about turning on/off this unit and the standby
mode, see page 26.
■ For other operations
• Optimizing the speaker parameters
automatically ☞ P. 30
• Basic playback operations ☞ P. 35
• Sound field programs ☞ P. 39
• Pure high-fidelity sounds ☞ P. 46
• FM/AM radio tuning ☞ P. 47
• XM Satellite Radio tuning ☞ P. 52
• SIRIUS Satellite Radio tuning ☞ P. 57
• iPod playback ☞ P. 63
• Bluetooth component playback ☞ P. 65
Step 3: Turn on the power and start
playback
Check the type of the connected speakers.
If the speakers are 6-ohm speakers, set “SPEAKER
IMP.” to “6Ω MIN” before using this unit (page 26).
You can also use 4-ohm speakers as the front speakers
(page 102).
