74 En
The “MANUAL SETUP” menu allows you to manually adjust speaker and system parameters using the remote control.
For the complete menu structure, see “SET MENU tree” (page 123).
y
The initial factory settings are indicated in bold under each parameter.
This section explains how to configure parameters in the
MANUAL SETUP menu using the OSD.
y
• To return to the previous menu level, press 9RETURN.
• Pressing JPARAMETER cancels the menu operation.
1 Set the operation mode selector to
E
AMP
and then press
H
MENU to enter “SET
MENU”.
The top “SET MENU” screen appears in the OSD.
2 Press 8k / n to select “MANUAL SETUP”
and then press 8ENTER.
The “MANUAL SETUP” screen appears in the OSD.
3 Press 8 k / n repeatedly and then press
8 ENTER to select and enter the desired
menu.
As an example, the following screen appears if
“SOUND MENU” is selected.
4 Press 8 k / n repeatedly and then press
8 ENTER to select and enter the desired
submenu.
As an example, the following screen appears if “LFE
LEVEL” is selected.
5 Press 8k / n to select the desired parameter
and then 8 l / h to change the parameter
settings.
• To increase the value, press 8 h.
• To decrease the value, press 8 l.
6 Press
H
MENU to exit from “SET MENU”.
Customizing this unit (MANUAL SETUP)
Operating the MANUAL SETUP
menu
[]/[]:
[ENTER]:
[
p
SET MENU
;AUTO SETUP
;MANUAL SETUP
;SYSTEM MEMORY
;SIGNAL INFO
Up/Down
Enter
.
[]/[]:
[ENTER]:
[
p
MANUAL SETUP
1 SPEAKER MENU
2 VOLUME MENU
3 SOUND MENU
4 VIDEO MENU
5 INPUT MENU
6 OPTION MENU
Up/Down
Enter
.
[]/[]:
[ENTER]:
[
p
3 SOUND MENU
A)EQUALIZER
B)LFE LEVEL
C)DYNAMIC RANGE
D)LIPSYNC
E)AUDIO SET
F)PURE DIRECT
Up/Down
Enter
.
[]/[]:
[p]/[[]:
[
p
B)LFE LEVEL
SPEAKER;;;;;;0dB
HEADPHONE;;-20dB
Up/Down
Adjust
.
