Remote control features
123 En
Advanced
Operation
■ Selecting a component to be controlled
You can select a component to be controlled independently of the
input source selected with the input selector buttons.
Press
5
SELECT l / h repeatedly to select the desired
component.
The name of the component to be controlled appears in the display
window (4) on the remote control.
■ Controlling optional components (Option
mode)
“OPTN1” and “OPTN2” are optional component control areas that
can be programmed with remote control functions independently
from any input source. This areas are useful for programming
commands that are to be used only as a part of a macro function or
for components that do not have a valid remote control code.
To select the option mode, press
5
SELECT l / h
repeatedly until “OPTN1” or “OPTN2” appears in the
display window (4) on the remote control.
You cannot set a remote control code for the optional component control
areas. See page 126 to program buttons operated within these component
control areas.
Use the setup mode of the remote control to customize the remote
control.
1 Press GSETUP on the remote control using a
ballpoint pen or similar object.
“SETUP” appears in the display window on the remote control.
2 Press 9k / n repeatedly to select the desired setup
mode.
3 After the configurations, press GSETUP again to
exit from the setup menu.
If you do not complete each of the operations within 30 seconds, this
unit automatically exits from the setup menu.
Note
DVD
or
OPTN1
OPTN2
Customizing the remote control
Setup mode Descriptions
Page
SETUP
Top setup mode menu.
–
LEARN
Learning mode. Use this feature to program codes
from other remote controls.
126
P-SET
Preset mode. Use this feature to change the remote
control code of each control area.
124
RNAME
Renaming mode.Use this feature to change the
name of each control area.
127
MACRO
Macro programming mode.Use this feature to set
the macro program.
129
CLEAR
Clearing mode. Use this feature to clear the
configurations of this unit.
130
ERASE
Erase mode. Use this feature to erase the learned
functions of each button.
131
EX-IR
Extended IR code mode. This feature is for the
authorized custom installers only.
—
LIGHT
Backlight mode. Use this feature to set the light up
mode of the remote control.
124
Note
