FM/AM tuning
69 En
Internal Source
Operation
If the signal received from the station you want to select is weak,
tune into it manually.
Manually tuning into an FM station automatically switches the tuner to
monaural reception to increase the signal quality.
1 Rotate the
D
INPUT selector on the front panel to
select “TUNER” as the input source.
2 Press
K
BAND to select the desired reception band.
“FM” or “AM” appears in the front panel display.
3 Press
I
TUNING MODE so that the AUTO indicator
disappears from the front panel display.
If a colon (:) appears in the front panel display, this unit is in
the preset station tuning mode, and automatic tuning is not
possible. Press
L
PRESET/TUNING to turn the colon (:) off.
4 Rotate MPROGRAM to tune into the desired station
manually.
• Rotate MPROGRAM rightward to tune into a higher
frequency.
• Rotate MPROGRAM leftward to tune into a lower
frequency.
Use this feature tune into the desired station directly by entering the
frequency.
1 Press 8BAND on the remote control repeatedly to
select the desired reception band.
“FM” or “AM” appears in the front panel display.
2 Make sure that a colon (:) does not appear in the
front panel display.
y
If a colon (:) appears in the front panel display, you cannot enter the
frequency of the desired station. Press
L
PRESET/TUNING on the
front panel to turn the colon (:) off.
3 Enter the frequency of the desired station by
pressing the numeric buttons (B).
Example: To tune into 103.7 MHz
y
• If you enter the number that is inappropriate for the frequency,
“ERROR” appears in the front panel display and then this unit
automatically tunes into the last selected station.
• If this unit cannot tune into the station you enter the frequency of,
this unit automatically tuned into the last selected station.
• (Australia model only)
You can omit entering the decimal place when you are attempting to
tune into a station which frequency ends with “0”.
Before performing the following operations, set the operation mode
selector on the remote control to
F
SOURCE and then press
3TUNER.
Manual tuning
Note
A FM 88.9 MHz
No colon (:)
(U.S.A. model)
Direct frequency tuning
A FM 88.9 MHz
No colon (:)
(U.S.A. model)
CLASSICAL 1
1
LIVE/CLUB
3
ENHANCER
7
STRAIGHT
0
FM 1--.- MHz
FM 10-.- MHz
FM 103.- MHz
TUNED
FM 103.7 MHz
(U.S.A. model)
