VIDEO CD PLAYER OPERATION
Direct-selection playback
By using the track number input buttons on the remote
control transmitter, any track you wish to listen to can be
played back directly.
Use the track number input buttons to select the desired
track number. Playback will begin automatically.
A. For example, to choose selection 5
Press the “5” button.
B. For example, to choose selection 12
(1)Press the “+10” button.
(2)Within a few seconds, press “2” button.
C. For example, to choose selection 20
(1)Press the “+10” button.
(2)Within a few seconds, press the “+10” button again.
(3)Within a few seconds, press the “0” button.
Note
If you select a track number higher than the number of tracks
on the disc, only the last track of the disc may be played
back.
“Skip search” and “Manual search” are performed using the
same buttons.
To play back a desired track on
the disc (Skip search)
The beginning of any track can be found automatically.
1 Select a disc and begin playback.
2 Press the button to advance or button to
reverse through the disc.
Press once for each track to be advanced or reversed.
•
Press once to advance to the track following the
one now playing back.
•
Press once to return to the start of the track now
playing back.
•
Press twice to return to the track before the track
now playing back.
Notes
•
This function can also be performed while the Video CD
player is stopped. Press the play/pause / button
when your desired track number appears on the track
number display. Playback will begin from the beginning of
the track.
•
This function will be performed forward or backward from
any point on the disc. However, it will not move forward
during playback of the final track.
2
1
