E-36
Storing your own equalizer patterns
An equalizer pattern of your own adjusting can be stored as a
user preset mode. Two patterns can be stored as desired.
To store
1 Select a desired equalizer mode by pressing the MUSIC
button and adjust the equalizer as you prefer by using the
equalizer control buttons.
2 Press the user program MEMORY button.
* The MEMORY indicator and the equalizer pattern will
flash for about 5 seconds.
“USER 1” or “USER 2” appears on the display.
3 Select “USER 1” or “USER 2” to which you will store the
selected equalizer pattern by pressing the MUSIC button
once or more before the flashing indicators go off.
4 Press the user program MEMORY button before the
flashing indicators go off. With this operation, a storing is
completed.
* In the same way, store another pattern to the other user
preset number.
Notes
• A new pattern can be stored in place of the former one.
• In step 3 or 4, if the flashing indicators go off before
operation, return to step 2.
To recall a user program
11 Play back a source. (For source playback, refer to pages
18 to 33.)
22 Press the MUSIC button once or more so that the user
preset number (USER 1 or USER 2) you want to recall
lights up.
