A SERVICE OF

logo

3 - 58
CHK
ADJ
CHECKING AND CHARGING THE BATTERY/
CHECKING THE FUSES
6. Install:
battery
7. Connect:
battery leads
(to the battery terminals)
CAUTION:
_
First, connect the positive battery lead
1
,
then the negative battery lead
2
.
8. Check:
battery terminals
Dirt Clean with a wire brush.
Loose connection Connect properly.
9. Lubricate:
battery terminals
10.Install:
battery cover
Refer to AIR FILTER CASE.
seat
Refer to COWLING AND COVER.
Recommended lubricant
Dielectric grease
1
2
EAS00181
CHECKING THE FUSES
The following procedure applies to all of the
fuses.
CAUTION:
_
To avoid a short circuit, always set the
main switch to OFF when checking or
replacing a fuse.
1. Remove:
seat
left side panel
Refer to COWLING AND COVER.