4-64
AC MAGNETO
2. Install:
• Woodruff key "1"
•Rotor "2"
• Degrease the contact surfaces of the tapered
portions of the crankshaft and rotor.
• When installing the woodruff key, make sure
that its flat surface "a" is in parallel with the
crankshaft center line "b".
• When installing the rotor, align the keyway "c"
of the rotor with the woodruff key.
3. Install:
•Washer
• Nut (rotor) "1"
4. Connect:
• AC magneto lead
Refer to "CABLE ROUTING DIAGRAM"
section in the CHAPTER 2.
5. Install:
• Dowel pin
• Gasket (left crankcase cover)
• Left crankcase cover "1"
• Hose guide (cylinder head breather hose)
"2"
• Bolt (left crankcase cover)
Tighten the bolts in stage, using a crisscross
pattern.
Nut (rotor):
65 Nm (6.5 m•kg, 47 ft•lb)
Bolt (left crankcase cover):
10 Nm (1.0 m•kg, 7.2 ft•lb)
