ES-3124 User’s Guide
250 Chapter 34 Introducing Commands
cluster member <mac-address>
Removes the cluster member. 13
mvr <vlan-id>
Disables MVR on the switch. 13
fe-spq
Disables Strict Priority Queuing
on the switch.
13
syslog
Disables syslog logging. 13
server <ip-
address>
Disables syslog logging to the
specified syslog server.
13
server <ip-
address>
inactive
Enables syslog logging to the
specified syslog server.
13
type [type]
DIsables syslog logging for the
specified log type (
sys, link,
config, error or report).
13
vlan <1-4094>
Enters the VLAN configuration
mode. See Section 34.11.5 on
page 263 for more information.
13
vlan-type <802.1q|port-
based>
Specifies the VLAN type. 13
igmp-
snooping
Enables IGMP snooping. 13
host-timeout <1-16711450>
Sets the host timeout value. 13
leave-timeout <1-16711450>
Sets the leave timeout value 13
unknown-
multicast-frame
<drop|flooding>
Sets how to treat traffic from
unknown multicast group.
13
reserved-
multicast-group
<drop|flooding>
Sets how to treat traffic belonging
to reserved multicast groups.
13
igmp-
filtering
Enables IGMP filtering on the
switch.
13
profile <name>
start-address
<ip> end-address
<ip>
Sets the range of multicast
address(es) in a profile.
13
interface port-channel
<port-list>
Enables a port or a list of ports for
configuration. See Section
34.11.4 on page 259 for more
details.
13
spq
Sets the queuing method to SPQ
(Strictly Priority Queuing).
13
wfq
Sets the queuing method to WFQ
(Weighted Fair Queuing).
13
wrr
Sets the queuing method to WRR
(Weighted Round Robin).
13
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION PRIVILEGE
