A SERVICE OF

logo

Dimension ES-3024 Ethernet Switch
Static Route Setup 7-1
Chapter 7
Static
Route Setup
Static routes tell the ES-3024 how to forward IP traffic when you configure the TCP/IP parameters
manually.
7.1 Static Route Setup
Click Static Route Setup from the navigation panel to display the following static route summary table.
Figure 7-1
Static Route Setup
Table 7-1 Static Route Setup
LABEL DESCRIPTION
Entry This field displays the index number of the route.
Active This field displays Yes when the static route is activated and No when is it deactivated.
Name This field displays the descriptive name for this route. This is for identification purpose
only.
Destination Address This field displays the IP network address of the final destination.
Subnet Mask This field displays the subnet mask for this destination.
Gateway Address This field displays the IP address of the gateway. The gateway is an immediate
neighbor of your switch that will forward the packet to the destination.
Metric This field displays the cost of transmission for routing purposes.