A SERVICE OF

logo

Chapter 3 Tutorials
NWA1300-NJ User’s Guide
26
3.2.1 Configuring the NWA1300-NJ Wireless Network
Settings
This example uses the following parameters to set up a wireless network.
Follow the steps below to configure the wireless settings on the NWA1300-NJ.
Note: To see the current SSID, go to the ADMINISTRATION > SYSTEM STATUS or
the QUICK VIEW screen.
1 Open the WIRELESS > BASIC screen in the NWA1300-NJ’s web configurator.
Configure the screen using the provided parameters (see page 26).
2 Enter “SSID_Example” as the ESSID and select a channel (6 in this example)
which is not used by another AP.
3 Select 802.11n + 802.11g + 802.11b in the 802.11 Mode field. Click Apply.
4 Go to WIRELESS > SECURITY.
SSID SSID_Example
Channel 6
Security Mode WPA-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode IEEE 802.11b/g/n (Mixed)