P314 Broadband Sharing Gateway with 4-Port Switch
7-4 Filter Configuration
7.2 Configuring a Filter Set
To configure a filter set, follow the procedure below.
Step 1.
Select option 21. Filter Set Configuration from the Main Menu to open Menu 21.1
Figure 7-3 Menu 21 – Filter Set Configuration
Step 2.
Select the filter set you wish to configure (no. 1-12) and press [ENTER]
.
Step 3.
Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 4.
Press [ENTER] at the message: [Press ENTER to confirm] to open Menu 21.1 – Filter Rules
Summary.
Menu 21 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 Tel_FTP_Web_WAN 9 _______________
4 _______________ 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
