PES-1014 User’s Guide
4-2 System
4.2 System Info
Move the cursor over the System link and click System Info to display the System Info screen shown next.
Use this screen to display general system information and record the switch’s name, location and contact person.
Figure 4-2 System Info
Table 4-1 System Info Description
FIELD DESCRIPTION EXAMPLE
Device Name Type in up to 255 characters for the name of the switch
here. This field is case sensitive.
Switch 1
Device Location Type in up to 255 characters for the location of the switch
here. This field is case sensitive.
Vienna Austria
Contact Type in up to 255 characters for the name of the contact
person for this switch. This field is case sensitive.
Bob Administrator
Device Description This read-only field displays your device’s model name. PES-1014
Device Up Time This read-only field displays the length of time that your
device has been up and running since it was last initiated.
Click your browser’s refresh button to get up-to-date
information in this field.
0 day 22 hr. 29 min. 39.91
sec
Product Version This read-only field displays the version of your device. 1.0000
Firmware Version This read-only field displays the current firmware version of
your device.
1.13 (9062153)
Hardware Version This read-only field displays the current hardware version of
your device.
1.1
Click Apply to save your changes to working memory or click Reset to go to the previous configuration. Refer to
3.5.4 for directions on saving your changes to flash memory before you restart the switch.
