Filter
Top Products
66
Launch • Launch WAP even if no profile
has been selected.
Activate • Program a default profile and
return to the profile list.
Create • Create a new profile.
Modify • Modify the parameters for a
profile
(2)
.
Delete • Delete a profile that you have
created
(2)
.
Back • Return to the previous screen.
Exit • Return to the main screen.
While creating or modifying a profile, you can choose the transmission mode: GPRS/GSM, GPRS or
GSM. If you select the GPRS/GSM transmission mode, GSM mode is activated if GPRS mode is not
available.
To create a new profile, you are required to replace the following parameters
(1)
:
- Profile name
- Homepage
- IP address
- Security
- Bearer choice (GPRS/GSM, GPRS, GSM)
- Push parameters
- Validate
If you have selected the GPRS transmission mode, you must fill in the following parameters:
- Authentication
(2)
(user name and password)
- APN
(1)
(1)
Enter the information supplied by your access provider.
(2)
Depending on type of profile.
65
11.2 Available options
You can access options in two different ways. You can either select the icon and then press , or
confirm “Options” when you consult a page.
Home • Access the homepage directly.
Bookmarks • Access your favourite sites
(book-marked sites).
Alert Inbox • View information sent over
WAP.
SnapShots • Save the whole of your screen.
Save items • Save images or sounds.
Show URL • Display the address of the site
you are currently consulting
(1)
.
Go To URL • Access the WAP site directly by
entering the address.
Reload • Refresh the current page.
Settings • Customise your WAP access.
Exit • End your WAP session and
return to the main screen.
At any time during your navigation, a long keypress on the key allows you to exit the WAP
mode.
11.3 Programming your access
(1)
Select a profile from the profile list and access the following options by pressing the key.
(1)
Depending on your phone model.
BH4_UM_GB_14-05-03 14/05/03 17:41 Page 65