Filter
Top Products
68
11.5 GPRS function
Your mobile phone has an efficient high-speed built-in modem based on GPRS technology
(1)
. With this
modem you will surf faster on the WAP and send your MMS more easily.
If you wish to activate the GPRS function of your mobile telephone, you are advised to do the following:
1. Contact your operator to subscribe to the appropriate service, request the technical parameters required
and ask your operator to check that your mobile telephone has been set correctly.
2. If you have any problems, you can contact the Alcatel Customer Care service.
Internet Assistance: www.alcatel.com
Alcatel hotline: see the “Alcatel Services” leaflet (calls charged at applicable local rates in your country)
67
If you selected the GSM transmission mode, you must fill in the following parameters:
- GSM user name
(1)
- Password
(1)
- Telephone number
- Access type
- Transmission speed
If you selected the GPRS/GSM transmission mode, you must fill in both the GPRS and GSM parameters.
11.4 Direct access/profile access
By selecting Customisation/Settings/WAP/GPRS, you can access the menu that will allow you to
change the launch parameters for your WAP service.
• Direct access: when you launch WAP from the main screen, you go directly
to the WAP homepage
specified by the default profile.
• Profile access: when you launch WAP from the main screen, you will see the following screen:
(1)
Depending on type of profile.
WAP
Homepage
Bookmarks
Profiles
Enter address
(1)
Contact your network operator to check service availability.
BH4_UM_GB_14-05-03 14/05/03 17:41 Page 67