AT&T SGH-i907 Cell Phone User Manual


 
7
Set up Your i907
Insert Battery
Remove the battery cover. 1.
Align the contacts on the battery with the contacts in the back of the device. 2.
Push the battery down until it locks into place. 3.
Replace the battery cover. 4.
Charge Battery
Plug the AC Travel Charger into a standard AC wall outlet. 1.
Plug the travel charger into the jack on the top right side of the phone with the green 2.
arrow facing up. The indicator light at the top of the device is red while charging, and
green when fully charged.
Note: When charging is complete, unplug the charger from the power outlet.
Insert microSD™ Card
A microSD™ Card is a removable memory card that will increase data
storage capacity of the device.
Remove the cover on the right side of the device, that reads microSD™. 1.
Insert the narrow end of the microSD™ Card into the slot, then replace 2.
the cover.
Note: microSD™ Card sold separately.
+