Filter
Top Products
20
To Recharge the Battery
Your CDM-9150X phone has a built-in charger func-
tion. To recharge the Battery Pack, always insert the
Battery Pack into the phone’s battery cavity.
1. Insert the BTR-9100 Battery Pack into the phone’s
battery cavity.
2. If the phone is on with the
indicator displayed,
press and hold
to turn the phone off.
3. Insert the flat connector end of the CNR-9100 AC
Adapter into the connector port on the bottom of
the phone.
4. Plug the AC Adapter to AC120V outlet.
5. Recharging will begin. The display will read “Now
Charging” with animation and the
indicator
will scroll in the upper right
corner of the display. Also,
the Charging Indicator at the
top of the phone will light
green.
6. When recharging is completed, the phone displays
“Fully Charged!”.
7. Disconnect the AC Adapter from the outlet.
8. Press and hold in the buttons on the flat connec-
tor of the AC Adapter and pull the connector away
from the phone.
The recharging time, from empty to full, depends on
the environmental temperature, 0 to +35 °C.
Now Charging
Recharging Time
1.5 to 2 h
Battery Type
Lithium Ion Battery Pack (BTR-9100)
Notes: 1. For complete recharging, it is recommended that
the phone be turned off during recharging.
2. It is normal for the battery to become a little warmer
during recharging.
3. Do not feed power to the phone without the battery
pack attached.
AC Adapter
CNR-9100
Buttons to unlatch
CDM-9150X
AC120V